When a disturbance is created on an object, it starts vibrating and sets the particles of the medium to vibrate. These vibrating particles then force the particles adjacent to them to vibrate. As a result, the adjacent particle is disturbed from its mean position and the original particle comes back to rest. This process continues till the disturbance reaches our ears.
When the school bell is struck with a hammer, it starts vibrating. This disturbance gives rise to the bell moving forward, it pushes the air in front of it. As a result of these vibrations, sound waves are produced.
Waves which need a material medium for propagation are called mechanical waves. Sound waves propagate through a medium because of the interaction of the particles present in that medium. Mechanical waves are governed by Newton’s laws of motion.
No we will not be able to hear the sound because sound needs a medium to propagate. On the moon is no atmosphere, you cannot hear any sound on the moon.
Our experts will give the answer soon.
Our experts will give the answer soon.
Our experts will give the answer soon.
The speed is defined as the distance travelled by a wave per unit time. Speed, wavelength, and frequency of a sound wave are related by the following equation:
Frequency of the sound wave, 
= 220 Hz
Speed of the sound wave, 
= 440 m s−1
For a sound wave,
Speed = Wavelength × Frequency
Hence, the wavelength of the sound wave is 2 m.
The time period between successive compressions from the source is equal to the time period of the tone, i.e., (1/500). This time period is reciprocal of the frequency of the wave and is given by the relation:
Intensity of a sound wave is not a physical quantity which can be accurately measured. It does not depend upon the sensitivity of the ear. Loudness is not an entirely physical quantity. The loudness of a sound is defined by its amplitude. The amplitude of a sound decides its intensity, which in turn is perceived by the ear as loudness.
The speed of sound depends on the nature of the medium. The speed of sound is fastest in case of solids. Its speed decreases in liquids and it is the slowest in gases.
Therefore, in iron, the speed of sound is the fastest at a given temperature.
Speed of sound, v = 342 m/s
Time taken by sound to travel from the source to reflecting surface, t = 3/2 = 1.5 s
Distance travelled by sound to reflecting surface from the source = v × t = 342 × 1.5 = 513 m
Concert halls are very big, so the sound might not reach every corner of the hall. Ceilings of concert halls are curved so that sound after reflection spreads uniformly in all parts of the hall.
In human beings, the audible range of an average human ear lies between 20 Hz to 20,000 Hz. Humans cannot hear sounds having frequency less than 20 Hz and greater than 20,000 Hz.
(a) Infrasound has frequencies less than 20 Hz.
(b) Ultrasound has frequencies more than 20,000 Hz.
Time taken by the sonar pulse to return, t = 1.02 s
Speed of sound in salt water, v = 1531 m/s
Total distance covered by the sonar pulse = Speed of sound × Time taken
Total distance covered by the sonar pulse = 1.02 x 1531 = 1561.62 m ....(i)
Let d be the distance of the cliff from the submarine.
Total distance covered by the sonar pulse = 2d
⇒ 2d = 1561.62 [From (i)]
⇒ d = 780.81 m
⇒ 2d = 1561.62
d = 780.81 m
Sound is defined as vibration that travels through the air or another medium as an audible mechanical wave. This creates a disturbance in the medium. It is produced from a vibrating body. This disturbance, when it reaches the ear, produces sound.
Yes, sound follows the same laws of reflection of light. The incident sound wave, reflected sound wave and normal sound wave all lie on the same plane. Also, the angle of incidence of sound is equal to angle of reflection of sound.
As the temp. increases, the speed of sound also increases. Therefore, the speed of sound on a hotter day is more. An echo is heard when the time interval between the original sound and the reflected sound is at least 0.1 s.
(i) Sound navigation and ranging which is used to find the depth of the ocean. This method is known as SONAR.
(ii) Stethoscope is used by doctors to measure heartbeat. Dr. is able to hear the sound due to multiple reflection of sound in the stethoscope.
Height of the tower, s = 500 m
Velocity of sound, v = 340 m/s
Acceleration due to gravity, g = 10 m/s2
Initial velocity of the stone, u = 0
Time taken by the stone to fall to the base of the tower, t1
According to the second equation of motion:
Hence , the splash is heard at the top after time, t
Where, t = t1 + t2 = 10 + 1.47 = 11.47 s
Speed of sound, = 339 m/s
Wavelength of sound, 
= 1.5 cm = 1.5 / 100 = 0.015 m
Speed of sound = Wavelength × Frequency
Frequency of of sound is 22600 Hz.
The audible range of the human ear is 20 Hz to 20000 Hz. It would not be audible.
Persistence of sound (after the source stops producing sound) due to repeated reflection is known as reverberation. Reverberation can be reduced by absorbing the sound using some materials as it reaches the wall and ceiling of the room and thus prevents the sound from getting reflected. This reflected sound reaches the other wall and again gets reflected partly. Due to this, sound can be heard even after the source has ceased to produce sound.
Some materials which are used to reduce reverberation are fibreboard, heavy curtains, plastics etc.
Loudness is defined as a measure of the response of the ear to the sound. Loudness depends on the amplitude of vibrations. In fact, loudness is proportional to the square of the amplitude of vibrations.
Sound frequencies greater than 20,000 Hz are called ultrasounds. Bats produce high-pitched ultrasonic squeaks. These squeaks reflect on prey and return back to the bats ear. This allows a bat to know the distance of his prey.
The objects to be cleansed are put in a cleaning solution and ultrasonic sound waves are passed through that solution. The high frequency ultrasonic waves are capable of removing the dirt from the objects very easily.
SONAR is an acronym for Sound Navigation And Ranging .
SONAR is a device that uses ultrasonic waves to measure the distance , direction and speed of underwater objects . It is also used to measure the depth of seas and oceans.
Compressions and rarefactions are produced because the disturbance in the medium is caused by sound waves. When an object vibrates then it moves forward, it pushes and compresses the air in front of it creating a region of high pressure in its vicinity. This region of high pressure is known as compressions. When it moves backward, it creates a region of low pressure in its vicinity. This region is known as a rarefaction.
Time taken to hear the echo, t = 5 s
Distance of the object from the submarine, d = 3625 m
Total distance travelled by the sonar waves during the transmission and reception in water = 2d
Velocity of sound in water,
Ultrasounds can be used to detect cracks and flaws in metal blocks. Defects in metal blocks occur due to crack in them. Cracks have air in them. The speed of sound in metal is greater than that in air. Thus, air acts as a rarer medium for sound waves. Whenever ultrasound is transmitted through a metal block that has defects, these waves get reflected in encountering such cracks. Therefore, these waves are not detected at the detector placed on the other side of the block, opposite to that of the transmitter. This indicates that there is a defect in the block.
Different sounds produced in our surroundings are collected by pinna. The collected sound passes through the auditory canal. At the end of the auditory canal, there is a thin membrane called the eardrum or tympanic membrane. When compression the medium reaches the eardrum the pressure on the outside of the membrane increases and force the eardrum inward. Similarly, the eardrum moves outward when the rarefaction reaches it. The eardrum starts vibrating back and forth rapidly when the sound waves fall on it. The vibrating eardrum sets the small bone hammer into vibration. The vibrations are passed from the hammer to the second bone anvil, and finally to the third bone stirrup. The vibrating stirrup strikes on the membrane of the oval window and passes its vibration to the liquid in the cochlea. This produces electrical impulses in nerve cells. The auditory nerve carries these electrical impulses to the brain. These electrical impulses are interpreted by the brain as sound and we get a sensation of hearing.
Take an electric bell and connect it to electrical supply. An airtight glass bell jar with a vacuum pump.
When we press the switch, we will be able to hear the bell. One can hear the sound of the ringing bell. Now, take a jar and make a small hole in the bottom and insert a small pipe though it. Connect the other end of the pipe to a vacuum cleaner. When the air in the jar is pumped out gradually, the sound becomes feeble although the same amount of current is flowing through the bell. It will be observed that the sound of the ringing bell decreases. When there is no air present inside, we will not be able to hear the sound of the bell. This shows that sound requires a medium for its propagation.
In longitudinal waves, the motion of the individual particles of the medium is in a direction that is parallel to the direction of energy transport. A longitudinal wave can be created in a slinky if the slinky is stretched out in a horizontal direction and the first coils of the slinky are vibrated horizontally. This is known as longitudinal wave.
Quality of sound is that characteristic which helps us to distinguish one sound from another. Sound produced by two persons may have the same pitch and loudness, but the quality of the two sounds will be different.
The speed of light is greater than the speed of sound. Sound of thunder takes more time to reach the earth as compared to light. Hence, a flash is seen before we hear a thunder.
Hearing range for humans = 20 Hz to 20 kHz
Speed of sound = 344 m/s
For a sound wave,
Speed = Wavelength × Frequency
= 20 Hz
= 20,000 Hz
Speed of sound in air = 346 m/s
Speed of sound in Aluminium = 6420 m/s
Let the length of the aluminium rod = d.
Therefore, time taken by the sound wave to reach the other end,
Therefore, time taken by sound wave to reach the other end,
The no. of oscillations produced in one second is called frequency .
Frequency of sound = 100 Hz
Total time = 1 min = 60 s
We know that,
Number of oscillations = Frequency × Total time
Number of oscillations/Vibrations = 100 × 60 = 6000
Therefore , the source vibrates 6000 times in a minute, producing a frequency of 100 Hz.
From the given graph,
Time period of the disturbance,
T = 2 µ s = 2 x 10-6 sec
Velocity of disturbance, v = 1500 m/s
Wavelength of the disturbance,
λ = vT = 1500 x 2 x 10-6 = 3 x 10-3 m
Graph (a) represents the male voice because usually the male voice has less pitch as compared to female voice.
If the time gap between the original sound and reflected sound received by the listener is around 0.1 s, only then the echo can be heard.
Speed of sound in air, v=344 m/s
The minimum distance travelled by the reflected sound wave for the distinctly listening the echo = velocity of the sound x time interval
= 344 x 0.1 => 34.4 m
But in this situation, the distance travelled by the sound reflected from the building and reaching to the girl will be (6 + 6 = 12 m). Therefore no echo will be heard by the girl.
Because the frequencies of vibrations of a pendulum is below 20 Hz and not in the audible range. But the sound of humming bees in the audible range (20 - 20000 Hz).
If an explosion takes place at the bottom of the lack. The longitudinal wave type of shock waves will take place.
Speed of sound = 340 m/s
Time, t = 10 sec
Distance = Speed x time = 340 x 10 = 3400 m => 3400 / 1000 = 3.4 km
The angle of incidence is always equal to the angle of reflection.
Now, angle made by incident sound with normal
= 90° – 50° = 40°
∴ x = 40°
Ceiling and walls are made curved so that sound after reflection reaches the target audience.
(i) Two sound waves having the same amplitude but different frequencies.
(ii) Two sound waves having the same frequency but different amplitudes.
(iii) Two sound waves having different amplitudes and also different wavelengths.
The distance travelled by sound wave per unit time is known as the speed of time.
Distance travelled by sound wave in periodic time (T) = wavelength (λ) of the sound wave.
Velocity of sound in air, v = 340 m/s
(i) Frequency, u = 256 Hz
∴ Wavelength, λ = v / T
λ = 340 / 256 = 1.33 m
Therefore , the wavelength of the wave is 1.33 m .
(ii) Wavelength, λ = 0.85 m
∴ Frequency v = λ x T
T = v / λ = 340 / 0.85 = 400 Hz.
The points of maximum density and minimum density are also called crests and troughs respectively.
Wavelength (A): It is defined as the distance between two successive crests or troughs of a wave is called wavelength. It is measured in the direction of the wave. Time period is the time taken for one complete cycle.
